- 重慶超宇物資有限公司
ChongQing ChaoYu WuZi Co., Ltd.
1.2 管件 Fitting
彎頭 elbow
異徑彎頭 reducing elbow
帶支座彎頭 base elbow
k半徑彎頭 long radius elbow
短半徑彎頭 short radius elbow
長半徑180°彎頭 long radius return
短半徑180°彎頭 short radius return
帶側向口的彎頭(右向或左向) side outlet elbow (right hand or left hand)
雙支管彎頭( 形) double branch elbow
三通 tee
異徑三通 reducing tee
等徑三通 straight tee
帶側向口的三通(右向或左向) side outlet tee (right hand or 1eft hand)
異徑三通(分支口為異徑) reducing tee (reducing on outlet)
異徑三通(一個直通口為異徑)reducing tee (reducing on one run)
帶支座三通 base tee
異徑三通(一個直通口及分支口為異徑) reducing tee (reducing on one run and outlet)
異徑三通(兩個直通口為異徑，雙頭式) reducing tee (reducing on both runs, bull head)
45°斜三通 45° lateral
45°斜三通(支管為異徑) 45° lateral (reducing on branch)
45°斜三通(一個直通口為異徑) 45° lateral (reducing on one run)
45°斜三通(一個直通口及支管為異徑) 45° lateral (reducing on one run and branch)
Y型三通(俗稱褲衩) true “Y”
四通 cross
等徑四通 straight cross
異徑四通 reducing cross
異徑四通(一個分支口為異徑)reducing cross (reducing on one outlet)
異徑四通(一個直通口及分支口為異徑) reducing cross (reducing on one run and outlet)
異徑四通(兩個分支口為異徑) reducing cross (reducing on both outlet)
異徑四通(一個直通口及兩個分支口為異徑) reducing cross (reducing on one run and both outlet)
異徑管 reducer
同心異徑管 concentric reducer
偏心異徑管 eccentric reducer
鍛制異徑管 reducing swage
螺紋支管臺 threadolet
焊接支管臺 weldolet
承插支管臺 sockolet
彎頭支管臺 elbolet
斜接支管臺 latrolet
鑲入式支管嘴 sweepolet
短管支管臺 nipolet
支管臺，插入式支管臺 boss
管接頭 coupling, full coupling
半管接頭 half coupling
異徑管接頭 reducing coupling
活接頭 union
內外螺紋縮接(俗稱補芯) bushing
管帽 cap (C)
堵頭 plug
短節 nipple
異徑短節 reducing nipple; swage nipple
1.3 彎管 Bend
預制彎管 fabricated pipe bend
跨越彎管(^ 形) cross-over bend
偏置彎管(~ 形) offset bend
90°彎管 quarter bend
環形彎管 cirele bend
單側偏置90°彎管(? 形) single offset quarter bend
S形彎管 “S” bend
單側偏置U形膨脹彎管(| ?形) single offset “U” bend
U形彎管 “U” bend
雙偏置U膨脹彎管 double offset expansion “U” bend
斜接彎管 mitre bend
三節斜接彎管 3-piece mitre bend
折皺彎管 corrugated bend
圓度 roundness
1.4 法蘭 Flange (FLG)
整體管法蘭 integral pipe flange
鋼管法蘭 steel pipe flange
螺紋法蘭 threaded flange
滑套法蘭(包括平焊法蘭) slip-on flange (SO); slip-on welding flange
承插焊法蘭 socket welding flange
松套法蘭 lap joint flange (LJF)
對焊法蘭 welding neckflange (WNF)
法蘭蓋 blind flange, blind
孔板法蘭 orifice flange
異徑法蘭 reducing flange
盤座式法蘭 pad type flange
松套帶頸法蘭 loose hubbed flange
焊接板式法蘭 welding plate flange
對焊環 welding neck collar (與stub end相似)
平焊環 welding-on collar
突緣短節 stub end, lap
翻邊端 lapped pipe end
松套板式法蘭 loose plate flange
壓力級 pressure rating, pressure rating class
壓力—溫度等級 pressure-temperature rating
法蘭密封面，法蘭面 flange facing
突面 raised face (RF)
凸面 male face (MF)
凹面 female face (FMF)
榫面 tongue face
槽面 groove face
環連接面 ring joint face
全平面;滿平面 flat face; full face (FF)
光滑突面 smooth raised face (SRF)
法蘭面加工 facing finish
粗糙度 roughness
光滑的 smooth
齒形 serrated
均方根 root mean square (RMS)
算術平均粗糙高度 arithmetical average roughness height (AARH)
配對法蘭 companion-flange
螺栓圓 bolt circle (B.C.)
1.5 墊片 Gasket (GSKT)
墊片的型式 type of gasket
平墊片 flat gasket
環形平墊片 flat ring gasket
平金屬墊片 flat metal gasket
夾棉織物的橡膠 elastomer with cotton fabric insertion
夾石棉織物的橡膠 elastomer with asbestos fabric insertion
夾石棉織物及金屬絲加強的橡膠 elastomer with asbestos fabric insertion and with wire reinforcement
無石墨壓縮白石棉墊片 non graphited compressed white asbestos gasket
天然白橡膠墊片 natural white rubber gasket
壓縮石棉墊片 compressed asbestos class gasket
浸聚四氟乙烯的石棉墊片 PTFE impregnated asbestos gasket
夾石棉的纏繞金屬墊片 spiral-wound metal gasket with asbestos filler
內環 inner ring
外環，外定位環 outer ring
波紋金屬墊片 corrugated metal gasket
波紋金屬包嵌石棉墊片 corrugated metal gasket with asbestos inserted
雙夾套波紋金屬包石棉墊片 corrugated metal double jacketed asbestos filled gasket
雙夾套墊片 double jacketed gasket
金屬包石棉平墊片 flat metal jacketed asbestos filled gasket
整體金屬齒形墊片 solid metal serrated gasket
槽形金屬墊片 grooved metal gasket
環形連接金屬墊片 ring joint metal gasket
八角環形墊片 octagonal ring gasket
橢圓環形墊片 oval ring gasket
透鏡式墊片 lens gasket
非金屬墊片 non-metallic gasket
